Don't forget to write for the elementary grades 50 enthralling and effective writing lessons ages 5 to 12
Book - 2011
Saved in:
- Subjects
- Published
-
San Francisco :
Jossey-Bass
[2011]
- Language
- English
- Corporate Author
- Corporate Author
- Other Authors
- Edition
- First edition
- Physical Description
- xxviii, 257 pages : illustrations ; 28 cm
- ISBN
- 9781118024317
- Preface to the Eighth Edition
- Preface to the First Edition
- Introduction
- 1. Considerations for Use of Steel
- 1.1. Properties of Steel
- 1.2. Types of Steel Products
- 1.3. Development of Structural Systems
- 1.4. Connection Methods
- 1.5. Data for Steel Products
- 1.6. Usage Considerations for Steel Structures
- 1.7. Choice and Planning of Steel Structural Systems
- 2. Structural Investigation and Design
- 2.1. Situations for Investigation and Design
- 2.2. Methods of Investigation and Design
- 2.3. Investigation of Columns and Beams
- 2.4. Investigation of Column and Beam Frames
- 2.5. Approximate Investigation of Indeterminate Structures
- 2.6. Service Conditions
- 2.7. Limit States Versus Service Conditions
- 2.8. Resistance Factors
- 2.9. Choice of Design Method
- 3. Horizontal-Span Framing Systems
- 3.1. Factors in Beam Design
- 3.2. Inelastic Versus Elastic Behavior
- 3.3. Nominal Moment Capacity of Steel Beams
- 3.4. Design for Bending
- 3.5. Design of Beams for Buckling Failure
- 3.6. Shear in Steel Beams
- 3.7. Deflection of Beams
- 3.8. Safe Load Tables
- 3.9. Manufactured Trusses for Flat Spans
- 3.10. Decks with Steel Framing
- 3.11. Concentrated Load Effects in Beams
- 3.12. Torsional Effects
- 3.13. Buckling of Beams
- 3.14. Beam Bearing Plates
- 4. Steel Columns
- 4.1. Column Shapes
- 4.2. Slenderness and End Conditions
- 4.3. Safe Axial Loads for Steel Columns
- 4.4. Design of Steel Columns
- 4.5. Columns with Bending
- 4.6. Column Framing and Connections
- 4.7. Column Bases
- 5. Frame Bents
- 5.1. Development of Bents
- 5.2. Multiunit Rigid Frames
- 5.3. Three-Dimensional Frames
- 5.4. Mixed Frame and Wall Systems
- 5.5. Special Problems of Steel Rigid Frame Bents
- 5.6. Trussed Frames
- 6. Miscellaneous Steel Components and Systems
- 6.1. Manufactured Systems
- 6.2. Composite Structural Elements
- 6.3. Tension Elements and Systems
- 7. Horizontal-Span Steel Trusses
- 7.1. General Considerations
- 7.2. Bracing for Trusses
- 7.3. Loads on Trusses
- 7.4. Investigation for Internal Forces in Planar Trusses
- 7.5. Design Forces for Truss Members
- 7.6. Combined Actions in Truss Members
- 7.7. Design Considerations for Steel Trusses
- 7.8. Two-Way Trusses
- 8. Steel Connections
- 8.1. Basic Considerations
- 8.2. Bolted Connections
- 8.3. Design of a Bolted Connection
- 8.4. Bolted Framing Connections
- 8.5. Bolted Truss Connections
- 8.6. Welding
- 8.7. Design of Welded Connections
- 8.8. Welded Steel Frames
- 8.9. Control Joints: Design for Selected Behavior
- 9. General Considerations for Building Structures
- 9.1. Choice of Building Construction
- 9.2. Structural Design Standards
- 9.3. Loads for Structural Design
- 9.4. Dead Loads
- 9.5. Building Code Requirements for Structures
- 9.6. Live Loads
- 9.7. Lateral Loads (Wind and Earthquake)
- 9.8. Load Combinations and Factors
- 9.9. Determination of Design Loads
- 9.10. Structural Planning
- 9.11. Building Systems Integration
- 9.12. Economics
- 10. Building Structures: Design Examples
- 10.1. Building One
- 10.2. Building Two
- 10.3. Building Three
- 10.4. Building Four
- 10.5. Building Five
- 10.6. Building Six
- Appendix A. Properties of Structural Sections
- Appendix B. Beam Design Aids
- Appendix C. Study Aids
- Terms
- Questions
- Answers to Questions
- Appendix D. Answers to Problems in Chapters
- References
- Index